1000cc ASNU Honda S2000 Injector Set
Honda S2000 ('00 to '05) ASNU Injector Set: 4 x 1000cc Saturated / High Impedance Ball & Seat Injectors.Featuring ASNUs proprietary diffuser plate. Includes pigtails HA003 or add Plug & Play adaptors HA006.
All injector sets include:
An advanced spray pattern, as a result of ASNU's proprietary diffuser plate, for precisely controlled atomization. This more uniform dispersion of fuel droplets means a better fuel/air mixture that burns more completely for improved cold starts, idle and fuel consumption.
ASNU's injectors are flow tested and rated at 43.5psi (3Bar) at 90ºF fuel temperature using CF-16B calibration fluid.
ASNU's injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.
This injector set contains high impedance injectors matched to the saturated injector signal generated by this vehicles OEM ECU, OR is suitable for use with an aftermarket ECU made or set up for high impedance injectors.
This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering. This plug conversion is made necessary because ASNU always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.
Click the thumbnail below to view Injector Sizing and Identification Ring Chart:
NOTE: Injector fitment pictured and actual injector may differ.
|WHP on Gas at 43.5psi 90%DC Turbo||485.71|
|WHP on Gas at 58psi 90%DC Turbo||561.00|
|WHP on E85 at 43.5psi 90%DC Turbo||373.63|
|WHP on E85 at 58psi 90%DC Turbo||431.54|
|WHP on Gas at 43.5psi 90%DC NA||582.86|
|WHP on Gas at 58psi 90%DC NA||673.20|
|WHP on E85 at 43.5psi 90%DC NA||448.35|
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: